Fravol Smart Series Edgebander Manual & Parts List

USER’S MANUAL AND MAINTENANCE
In choosing the position of the machine you have to take into consideration :
1) that the place must be dry and not exposed to rain or moisture;
2) that the surface must be perfectly plain, on an anti-slip floor and with an ultimate
load adequate to the weight of the machine;
3) that that there there must be a wide working zone, zone, free from obstacles around around the machine;
4) that that the the place place where the the machine will be must be guarded or or locked locked to prevent
the free access of children or of unauthorised people;
5) that there must be enough light;
6) that that it must be placed near the power switch with differential;
7) that that the power supply supply system is equipped with TT earth in in compliance with
the regulations in force;
8) that that the room temperature must be between +15º and +30º C (59º F-86ºF).
Pic. 9
FIRST CLEANING OF THE MACHINE:
Before you install the machine clean the surfaces not painted from the eventual protective oil
with with detergents detergents like like alkaloids (oil of turpentine naphtha).
THESE LIQUIDS MUST NOT BE VAPORIZED BUT SOAKED IN IN A CLOTH CLOTH WHICH WILL
HAVE TO BE DISPOSED DISPOSED ACCORDING TO THE ENVIRONMENTAL REGULATIONS.
Rev 1-03/07 17