Fravol Smart Series Edgebander Manual & Parts List
Fravol Smart Series Edgebander Manual & Parts List
Fravol Smart Series Edgebander Manual & Parts List
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
04 MAINTENANCE<br />
04.1 GENERAL NOTICE<br />
USER’S MANUAL AND MAINTENANCE<br />
Follow the information and instructions provided in the manual to have a perfect functioning of<br />
the machine.<br />
During maintenance:<br />
1) selector in position "O" (OFF);<br />
2) The pneumatic selection selection valve must be open<br />
4.2 ORDINARY MANTEINANCE<br />
DESCRIPTION FREQUENCY TYPE OF OPERATION<br />
Remove the shavings and dust using a<br />
vacuum cleaner. DO NOT USE<br />
General cleaning Daily<br />
COMPRESSED AIR AND/OR METAL<br />
TOOLS.<br />
Clean the glue head.<br />
Cleaning of the glue pot Every 150 Remove the shavings and dust using a<br />
unit<br />
hours<br />
vacuum cleaner. Clean the glue head.<br />
Remove the dust from the gum lids with a<br />
Chain (panel panel conveyer Every 150 vacuum cleaner and afterwards degrease<br />
belt)<br />
hours<br />
them with a cloth soaked in diluents or<br />
acetone. acetone<br />
Remove the shavings and dust from the<br />
CLEANING OF THE<br />
END-TRIMMING,<br />
SCRAPING UNIT AND<br />
ROUGHING UNIT<br />
Every 150<br />
hours<br />
guides and sliding balls using a vacuum<br />
cleaner. Grease the ball bearing slide<br />
ways using suitable greaser.<br />
RETURN CHAIN<br />
Supporti trasmissione<br />
catena<br />
Every 300<br />
hours<br />
Every 500<br />
hours<br />
Check the tension and remove the dust<br />
using vacuum cleaner (do not grease).<br />
Grease using suitable greaser.<br />
THE GUARANTEE EXPIRES WHEN THE MAINTANANCE IS NOT CORRECT.<br />
Rev 1-03/07 33