Fravol Smart Series Edgebander Manual & Parts List

More documents

Recommendations

Info

02 INSTALLATION USER’S MANUAL AND MAINTENANCE The installing must be carried out either by a builder’s technician, a person in charge or by qualified personnel. 02.1 STORAGE The machine must be kept dry ad away from dust if placed in a warehouse. The machine must be kept covered with a length of cloth or nylon ad lifted from the the ground. Do Do not put any object on the machine 02.2 TRANSPORT AND HANDLING Before lifting the machine, please make sure that eventual mobile elements are well fixed. The machine can be lifted with a forklift truck inserting the forks in the appropriate central space as shown in Pict. 7. Pic. 7 If you need to transport the machine for a long way, it can be loaded both on containers, wagons and lorries. For this purpose please consult the figures on par.01.6 to see the the weight and the the overall dimensions. They are helpful to check the possibility to to pass through narrow narrow spaces. spaces. The machine machine is usually usually packed packed with heatshrinked nylon, and and positioned vertically vertically on two wooden wooden transoms transoms that you can can use to fix it to the ground during transport. In this way the machine can be easily moved, loaded or or unloaded with a normal normal forklift truck truck of adequate capacity (pict.6). If on the contrary the machine is handled on a wooden case, case, it it is necessary to lift it with a crane, with ropes or cables of an adequate adequate capacity capacity and hook it on the two sides. sides. (pict. 7) Please make sure that you have a crane of capacity capacity adequate to the lifting of the machine (see par. 01.6). Lift the machine with extreme caution and move it slowly, without shakes or sudden movements. Rev 1-03/07 15
DANGER: USER’S MANUAL AND MAINTENANCE The lifting and transport can be very dangerous if they are not done with the maximum caution. Therefore get unauthorised people out of the way; clean, clear away and delimit the transfer zone, verify the entireness and the suitability of the means at your disposal, don’t touch the hanging loads and keep at safety distance. When transported the loads won’t have to be lifted more than 20 cm from the ground. Besides make sure that the working zone is free and that there is enough enough ESCAPE SPACE, that is a free free and safe zone where people can move fast , should the load fall down. ATTENTION: The surface on which you are going to load the machine must be horizontal to prevent it from moving. Once you you have placed the machine on the means of transport, make sure it is well blocked. Block the machine to the the flatcar through adequate ropes (see par 01.6 for the weight and the overall dimensions of the machine). The ropes must be fixed to the the machine and tight towards the the fixing point on the supporting surface; if necessary the machine can be further blocked to to the flatcar with adequately solid nails nails and and screws screws using using the the two two wooden wooden beams beams on on which which the the machine machine is is fixed. fixed. After the transport, take take away all the ropes from the machine and make sure that that it ids ids in a safe position. Unload from the means of transport in the same way you loaded it. Unpack the machine machine and dispose dispose of the package package dividing the different components (nylon, wood etc) and respect respect the current local waste disposal disposal regulations. regulations. After verifying verifying the entireness entireness of the machine, machine, position it. 02.3 POSITIONING: Check the solidity of the floor so that it has a minimum ultimate load of 800kg/m2. Make sure that the machine is laid laid on a uniform and plain surface; put put a level on on the the machine surface, first longitudinally and and then transversally transversally to check whether it is is straight straight and make make eventual corrections by using the screws (B) (pict.8). Finally fix it to the floor by using the screws (A) (fig.8). Pic. 8 Rev 1-03/07 16
Page 1 and 2: INDEX CHAPTER 01 I INTRODUCTION 1.1
Page 3 and 4: ACCESSORY 21 ROUNDING UNIT USER’S
Page 5 and 6: USER’S MANUAL AND MAINTENANCE Rev
Page 7 and 8: 13) ACCESSORY 18 USER’S MANUAL AN
Page 9 and 10: 1.6 OVERALL DIMENSIONS 1.7 TECHNICA
Page 11 and 12: USER’S MANUAL AND MAINTENANCE •
Page 13 and 14: USER’S MANUAL AND MAINTENANCE SAF
Page 15 and 16: APPAREL: USER’S MANUAL AND MAINTE
Page 17: SAFE MAINTENANCE: USER’S MANUAL A
Page 21 and 22: 02.4 CONNECTION OF THE ELECTRIC SYS
Page 23 and 24: USER’S MANUAL AND MAINTENANCE Pic
Page 25 and 26: USER’S MANUAL AND MAINTENANCE Mak
Page 27 and 28: LED DESCRIPTION USER’S MANUAL AND
Page 29 and 30: 03 USAGE 03.1 USAGE TIPS USER’S M
Page 31 and 32: 03.3 FUNCTIONNING (AUTOMATIC) FOR S
Page 33 and 34: ATTENTION: USER’S MANUAL AND MAIN
Page 35 and 36: 6 36 64 7 34 23+24 8 36 6 9 34 7 10
Page 37 and 38: 4.3 LUBRICATOR TABLE USER’S MANUA
Page 39 and 40: USER’S MANUAL AND MAINTENANCE Sel
Page 41 and 42: USER’S MANUAL AND MAINTENANCE You
Page 43 and 44: strips will automatically find thei
Page 45 and 46: A03. 07 HELPFUL TIPS USER’S MANUA
Page 47 and 48: A06. 02 PNEUMATIC ADJUSTMENTS USER
Page 49 and 50: USER’S MANUAL AND MAINTENANCE Pne
Page 51 and 52: A07. 02 ADJUSTMENTS Reference to pi
Page 53 and 54: USER’S MANUAL AND MAINTENANCE A08
Page 55 and 56: USER’S MANUAL AND MAINTENANCE The
Page 57 and 58: USER’S MANUAL AND MAINTENANCE Cha
Page 59 and 60: USER’S MANUAL AND MAINTENANCE To
Page 65 and 66: USER’S MANUAL AND MAINTENANCE The
Page 67 and 68: USER’S MANUAL AND MAINTENANCE If
Page 69 and 70:
A10 SCRAPER UNIT ACCESSORY N. 10 A1
Page 71 and 72:
USER’S MANUAL AND MAINTENANCE 1 L
Page 73 and 74:
A11. 02 ADJUSTMENT USER’S MANUAL
Page 75 and 76:
A13 BLOWING UNIT ACCESSORY N. 13 US
Page 77 and 78:
A21 ROUNDING UNIT ACCESSORY N° 19
Page 79 and 80:
USER’S MANUAL AND MAINTENANCE the
Page 81 and 82:
USER’S MANUAL AND MAINTENANCE THE
Page 83 and 84:
USER’S MANUAL AND MAINTENANCE A21
Page 85 and 86:
USER’S MANUAL AND MAINTENANCE Sol
Page 87 and 88:
USER’S MANUAL AND MAINTENANCE Def
Page 89 and 90:
USER’S MANUAL AND MAINTENANCE A23
Page 91 and 92:
USER’S MANUAL AND MAINTENANCE Do
Page 93 and 94:
A16. 02 LUBRICATOR ADJUSTMENTS USER
Page 95 and 96:
CAUTION: USER’S MANUAL AND MAINTE
Page 98 and 99:
Questo catalogo riporta informazion
Page 100 and 101:
Catalogo ricambi Spare parts catalo
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204:
show all

Fravol Smart Series Edgebander Manual & Parts List

Create successful ePaper yourself

Delete template?

Save as template?