Fravol Smart Series Edgebander Manual & Parts List

ATTENTION:
USER’S MANUAL AND MAINTENANCE
When one of the programmes (pos.1-2-3 Fig. 1) is selected, the scraping
unit MUST be disabled:
1. manually with the levers (pos. C Fig. 2)
2. automatically, if ACCESSORY 20 is installed (disable scraping unit
automatically), by pressing the icon (pos. A Fig.1), which will turn red
and enable the pneumatic cylinder (pos. F Fig. 2).
A10. 02 ADJUSTMENT
With reference to pict 2, the following adjustments are possible for each tool :
1 Turn lever (E) to vary horizontally the work depth of the upper tool of the
scraping insert and turn lever (D) to vary that of the lower tool.
2 Turn lever (A) to vary vertically the work depth of the upper tool of the scraping
unit and turn lever (B) to vary that of the lower tool.
3 Move away the scraping unit from the belt with knob (C) to exclude it.
It's important to exclude the unit when not used to prevent it from damages.
A10. 03 SUBSTITUTION OF PLUGS
Rev 1-03/07 A10-2
Pic. 2