Fravol Smart Series Edgebander Manual & Parts List

1) ACCESSORY 03
EDGE LOADER UNIT with bonding
2) ACCESSORY 06
- PRESSING ROLLER unit for bonding edges
- UNIVERSAL SHEARING unit for cutting edges
3) ACCESSORY 08
USER’S MANUAL AND MAINTENANCE
END-TRIMMING unit for cutting protruding edges (at sides of panel)
4) ACCESSORY 09
Multipurpose ROUGHING UNIT for roughing/bevelling/rounding top and
bottom panel edges
5) ACCESSORY 10
SCRAPING unit for PVC-ABS edges with suction circuit and shavings box
6) ACCESSORY 11
BRUSHING unit (TILTING)
7) ACCESSORY 13
BLOWING unit for brightening edge colour after machining (plastic materials)
8) ACCESSORY 20
PLC MICROPROCESSOR CONTROL for setting up and running work
programmes
The following accessories are available as OPTIONALS:
OPTIONALS
9) ACCESSORY 05
AUTOMATIC LOADER for pre-cut, thick strip and Formica edges. The edge is
dragged by a pin roller that loads the edge automatically.
automatically.
10) ACCESSORY 14
REVERSE UNIT to improve the hold of the glue on the edges (wood, Formica
and laminate) the the spreading spreading roller turns the the opposite opposite direction direction to which the
panel panel is is being being fed.
11) ACCESSORY 16
BRUSH LUBRICATION UNIT sprays clouds of anti-adhesive liquid onto the
brushes as the panel passes in order to ensure that the edge being being applied is
perfectly clean and glossy.
12) ACCESSORY 17
AUTOMATIC TEMPERATURE REDUCTION a timer is used to optimise glue
management when the machine is in “stand by”.
Rev 1–03/07 3