Fravol Smart Series Edgebander Manual & Parts List

USER’S MANUAL AND MAINTENANCE
3ë case: the radius is irregularly cramped between the two glued edges
(pict. 12 - 13)
Defect “A” Defect “B”
These problems can singularly occur or all together and concern the whole length of the
panel (H) (pict.14):
Defect "A" (pict.12) occurs for the whole height of the panel
With reference to picture 9
fig. 12 fig. 13
fig. 14
Solution: loosen the 4 screws (E) and lower the radial copier (CR) by turning the
adjustment screw (A).
Rev 0-12/05 A21-10