Fravol Smart Series Edgebander Manual & Parts List
Fravol Smart Series Edgebander Manual & Parts List
Fravol Smart Series Edgebander Manual & Parts List
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USER’S MANUAL AND MAINTENANCE<br />
NOTE: The machine has a “STAND-<br />
BY” f unction t hat ‘ disables’ the<br />
rounder-corner unit t emporarily<br />
WITHOUT S WITCHING O FF THE<br />
MACHINE; t his a dditional function<br />
is needed to machine t he f irst 2<br />
(two) sides of the pa nel i n order to<br />
avoid incorrect machining when the<br />
rounder-corner unit i s ope rational,<br />
fig. 1a<br />
as illustrated in Fig.1a. The function is enabled by punching key A (Fig. 1)<br />
when the MACHINE IS ON. The key will turn yellow. Re-enable the roundercorner<br />
unit by pressing key A again (Fig. 1).<br />
A21. 02 ADJUSTMENTS<br />
You can adjust the position of the cutter considering an axis parallel and one orthogonal<br />
to the direction of rotation of the tool and turning the adjustment screws (A) and (B)<br />
pict.2.<br />
CAUTION: CAUTION<br />
A21. 03 PNEUMATIC ADJUSTMENTS<br />
fig. 2<br />
CHECK PERIODICALLY THAT ALL SCREWS ARE WELL FASTENED.<br />
The RADIAL CO PYING CYL INDER (C2) Fig. 3 produces a perfect copy of the tool<br />
throughout the entire machining cycle. Pressure must be between the values shown on<br />
Rev 0-12/05 A21-2