Fravol Smart Series Edgebander Manual & Parts List
Fravol Smart Series Edgebander Manual & Parts List
Fravol Smart Series Edgebander Manual & Parts List
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USER’S MANUAL AND MAINTENANCE<br />
A09. 02. 03 ADJUSTMENTS FOR THE SMOOTHING OF EDGES THIKNESS 3 mm<br />
1 Regulating the front copier:<br />
Open the protection box.<br />
Loosen the knobs knobs (A) which block the copier.<br />
Move the mobile part (B) of the copier (C) by using<br />
the lever (D).<br />
Place a small piece of the unglued edge between the<br />
two parts.<br />
Should the label (1) be present, put the piece of th the edge into position (E).<br />
Fasten the knobs (A).<br />
2 Inclination of the cutter engine:<br />
Loosen the inner nut (F).<br />
Turn the unit unit manually and set it to 30º (rif. R3) R3) checking its position on the on<br />
the dial on the lateral aluminium slab (H).<br />
Fasten Fasten the inner nut (F).<br />
3 Variation in the dimension of the smoothing:<br />
After having carried out all the adjustments required you can vary the smoothing<br />
by turning lever (I).<br />
4 Variation in the dimension of the radius:<br />
After having carried out all the adjustments required you can vary the radius on<br />
the edge by turning levers (K).<br />
A09. 02. 04 SPECIALADJUSTMENTS FOR THE SMOOTHING OF EDGES:<br />
CAUTION:<br />
Pic. 3<br />
Rev 1-03/07 A09-4
Change language