Fravol Smart Series Edgebander Manual & Parts List

CAUTION:
USER’S MANUAL AND MAINTENANCE
If for any reason the panel stopped during the work of the rounding unit, do
not restart the machine until the panel has been removed; to do that, turn
the pressure beam (Chapt. 3). 3).
After this, press the “RESET” button (A) pict. 7b, all safety alarms get deactivated deactivated.
To start working again press the starter push button of the transport band (B) pict. 7b
and the rounding unit will automatically go back to the start position.
fig. 7b
Rev 0-12/05 A21-6
fig. 7a