Fravol Smart Series Edgebander Manual & Parts List

USER’S MANUAL AND MAINTENANCE
The unit is equipped with a selector that disables the pneumatic pressure (pos. A Fig. 2)
for edging and end-trimming at other angles than 90°.
0 = Enable
1 = Disable
To ensure system SAFETY, the unit is fitted with a proximity roximity microswitch that detects its
position (if the unit is not in position, the machine stops and an alarm is is triggered). triggered).
ENGINE OVERHEATING:
IMPORTANT:
- CLEAN THE COOLING CHANNELS OF THE BLADE AND CUTTER
ENGINES EVERY DAY WITH COMPRESSED AIR.
-MAKE SURE THAT THE TOOLS ARE WELL SHARPENED
Pic. 2
Rev 1-03/07 A08-2