Fravol Smart Series Edgebander Manual & Parts List

A23. 04 MAINTENANCE
Referring to Fig. 3:
USER’S MANUAL AND MAINTENANCE
If the cutter is worn and its teeth need to be sharpened or substituted, causing the
lowering of the cutting line, you can realign the cutters by adjusting the depth of the units
X and Y. . Turn hand-wheel (A) to adjust unit X and hand-wheel (B) to adjust unit Y; turn
them anticlockwise or clockwise depending if you want remove more or less material.
A23. 05 SUBSTITUTION OF TOOLS
fig. 4
fig. 5
Rev 0-12/05 A23-3