Technical Manual - Tunstall GmbH

More documents

Recommendations

Info

2. Prior knowledge required 2.2 System structure 8 Group bus Group electronic Group electronic LAN LAN for ESPA 4.4.4 remote maintenance Paging/DECT Fig. 2: System structure Ward bus Secondary lines Secondary lines Room 1 Room 2 Ward bus Secondary lines Secondary lines Room 1 Room 2 Physical group 2 Physical group 1 The CONCENTO PLUS nurse call system is controlled decentrally via Group Electronics. Each Group Electronic controls a ward bus, i.e. a physical group. The nurse call system is based on a bus system that is comprised of a group bus and ward buses. The group bus interconnects all Group Electronics, the Management Interface and the fire alarm interface of the nurse call system. The ward bus is connected to a Group Electronic and connects all room terminals of a physical group to each other: Terminal SD6 P, Terminal S4 P, Terminal S4 B, display modules, call/presence combination bus (RAB) and Management In‐ terface. The room terminals control the devices inside a room. The devices are connec‐ ted to the room terminal in a star or line configuration as ”secondary lines”. The Management Interface provides interfaces to external systems. It is con‐ nected to the group bus or the ward bus, depending on the application. The Ma‐ nagement Interface provides interfaces to the following systems: a/b interface to telephone systems, ESPA 4.4.4 interface to DECT or pager systems and a network access for service access via FTP. CONCENTO PLUS - Technical Manual, 11/12 (Rev. 3.0), 00 8814 14
CONCENTO PLUS - Technical Manual, 11/12 (Rev. 3.0), 00 8814 14 2. Prior knowledge required CONCENTO PLUS ' own ConLog PLUS management software is also connected to the Management Interface via an RS232 interface. The entire nurse call sys‐ tem is configured via the ConLog PLUS management software. The system's power supply is provided via decentrally installed power supply units. The number and installation location of the power supply units depend on the respective power requirement. 2.2.1 Speech communication Speech communication and data transfer are separate from each other. This means that nurse call systems are possible with or without speech communica‐ tion. Mixed operation is possible with no problem. The speech line connects the system's own speech devices: Terminal SD6 P Terminal S4 P Terminal S4 B One speech channel is available for each physical group. Besides speech communication within the nurse call system, speech commu‐ nication via telephone devices connected to the CONCENTO PLUS nurse call system via the analog a/b interface of the Management Interface is also pos‐ sible, see from Page 12. 9
Page 1 and 2: CONCENTO PLUS Technical Manual COMM
Page 3 and 4: CONCENTO PLUS - Technical Manual, 1
Page 7 and 8: 1.5 General safety regulations CONC
Page 9: 2. Prior knowledge required 2.1 Sys
Page 13 and 14: 2.4 ConLog PLUS Management Software
Page 15 and 16: 2.5.2 Group speech Group bus CONCEN
Page 19 and 20: Per room Per bed In WC room Termina
Page 21 and 22: Per room Per bed In WC room Display
Page 23 and 24: 3.3 Staff room c+k Per room CONCENT
Page 25 and 26: 3.4.2 Function room without speech
Page 27 and 28: 3.5.2 Ward bathroom without speech
Page 29 and 30: Per room Display module or Call/pre
Page 31 and 32: Per room Terminal SD6 P or Terminal
Page 33 and 34: Per room Display module or Call/pre
Page 35 and 36: Per apartment Per bed Terminal S4 B
Page 37 and 38: 4. Accessories required Accessories
Page 39 and 40: 5. Installation examples See below
Page 41 and 42: 5.2 Nurse call system with speech:
Page 43 and 44: 5.4 Assisted living g (equipotentia
Page 45 and 46: 5.5.2 1‐bed room with WC Ward bus
Page 47 and 48: 5.5.4 1-bed room with WC: Wiring in
Page 49 and 50: 6. Installation sequence Work step
Page 51 and 52: 7. Defining mounting positions 7.1
Page 53 and 54: 7. Defining mounting positions 7.3
Page 55 and 56: 7.3.3 Switches ÀÀ ÀÀÀÀÀ ÀÀ
Page 59 and 60: 8.3 Power supply cable (code: k) CO
Page 61 and 62:
8.3.1 Earthing the nurse call syste
Page 63 and 64:
8.5 Group bus and ward bus (code: c
Page 65 and 66:
8. Laying cables 4. Only now cut of
Page 67 and 68:
8.5.4 Ward bus Group bus GE Termina
Page 69 and 70:
9. Switching on the power supply Pr
Page 71 and 72:
10. Configuring the nurse call syst
Page 73 and 74:
CONCENTO PLUS - Technical Manual, 1
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
11.2.1.1 Checking function from WCs
Page 81 and 82:
Page 83 and 84:
12.1 Room terminals 19 0700 20 Term
Page 85 and 86:
Terminal SD6 P, order no. 19 0700 2
Page 87 and 88:
Terminal SD6 P, order no. 19 0700 2
Page 89 and 90:
Tunstall GmbH, Orkotten 66, 48291 T
Page 91 and 92:
Page 93 and 94:
Display module, order no. 19 0700 8
Page 95 and 96:
Display module, order no. 19 0700 8
Page 97 and 98:
Call/presence combination bus (RAB)
Page 99 and 100:
Tunstall GmbH, Orkotten 66, D-48291
Page 101 and 102:
Page 103 and 104:
Corridor display, order no. 19 0781
Page 105 and 106:
Corridor display, double-sided, ord
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
12. Product leaflets 12.4 Call swit
Page 119 and 120:
Call switch with connection socket,
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
12. Product leaflets 12.6 Power sup
Page 137 and 138:
Power supply unit UPS, Order No. 77
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Power supply unit, Order No. 77 340
Page 145 and 146:
3. Commissioning Power supply unit,
Page 147 and 148:
Power supply unit UPS 60, Order No.
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Battery Set for UPS 60, Order No. 7
Page 155 and 156:
Battery Set for UPS 60, Order No. 7
Page 157 and 158:
13. Programming tables, checklist
Page 159 and 160:
Programming table, terminal configu
Page 161 and 162:
Programming table, group coupling P
Page 164:
Find all you want to know about the
show all

Technical Manual - Tunstall GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?