You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Call switch with 2 connection sockets, order no. 19 0704 20<br />
Connection on terminal, order no. 19 0700 x0, or display module, order no. 19 0700 80, or RAB,<br />
order no. 19 0701 00 (CONCENTO PLUS system)<br />
GND<br />
Reassurance light<br />
See table below<br />
Call input<br />
+24 V<br />
Order no. 19 0700 x0<br />
or 19 0700 80<br />
or 19 0701 00<br />
Device Order no.<br />
Display module 19 0700 80<br />
RAB<br />
19 0701 00<br />
Terminal 19 0700 x0<br />
BK<br />
YE<br />
WH(YE)<br />
RD<br />
IY(ST)Y 2x2x0.8 mm<br />
Call type Reassurance light Call input<br />
1 )<br />
WC Call WL WR<br />
Call Bed 1 RL R1<br />
Call Bed 2 RL<br />
R2<br />
Call Bed 3 RL R3<br />
WC Call WL R3<br />
Call Bed 1 RL R1<br />
Call Bed 2 RL<br />
R2<br />
1 ) Note! Many inputs of the display module, RAB and terminals are configurable, i.e<br />
the call type can be changed. In addition there are further inputs available that are also<br />
configurable. For details, read the product leaflet accompanying the respective device.<br />
Several call buttons in the room<br />
Max. 4 call devices can be connected in line or star topology. The max. cable length per input is 20 m. The integrated 120 kOhm<br />
terminating resistor must be active for all call devices (= factory setting).<br />
Light switching<br />
same as LT1, but for pear push switch 2<br />
24 V DC not from<br />
the nurse call system<br />
Light<br />
230 V AC<br />
Light switching - see below<br />
IY(ST)Y 2x2x0.8 mm<br />
Pulse relay<br />
LT2<br />
LT2<br />
LT1<br />
LT1<br />
GND<br />
RL<br />
RT<br />
+24 V<br />
Connector 7<br />
on switch<br />
00 8814 11, 10/12 (Rev. 2.0) 2<br />
<strong>Technical</strong> <strong>Manual</strong> Page 120<br />
RD<br />
BK<br />
WH(YE)<br />
YE<br />
Caution! Do not change the DIP switch or jumper 6. It must be in the ”RA ON” position.<br />
Recommended pulse relays:<br />
Anti-surge diode<br />
min. 1N4007<br />
Pulse relay (electronic): Pulse relay (mechanical*): Switching relay (mechanical) *):<br />
ELTAKO, ES60-TX60-24VDC<br />
ELTAKO, ES75-100-12..24 VDC<br />
SCHIELE entrelec TX60-24V<br />
BIAIG electronics TX60-24V<br />
ELTAKO, 1S9-24 VDC<br />
ELTAKO, S91-100-24 VDC<br />
LT2<br />
LT2<br />
LT1<br />
LT1<br />
GND<br />
RL<br />
RT<br />
+24 V<br />
Connector 7 on switch<br />
same as LT1, but pear push switch 2<br />
Light button on pear push switch 1<br />
Pear push switch 1<br />
Pear push switch 2<br />
ELTAKO, R12-100-24 VDC (for DIN rail)<br />
ELTAKO, R91-100-24 VDC (Flush-mounted, surface-mounted version)<br />
FINDER, 49.61-7024.4050<br />
<strong>Tunstall</strong> <strong>GmbH</strong>, Orkotten 66, 48291 Telgte, www.tunstall.de
Change language