13.04.2013 Views

Technical Manual - Tunstall GmbH

Technical Manual - Tunstall GmbH

Technical Manual - Tunstall GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3. Commissioning<br />

Power supply unit, Order No. 77 3401 00<br />

1. Connect input and output terminal connections. (Refer to items 2.1 and 2.2)<br />

2. Switch on the input voltage.<br />

From now on, the connected nurse call system devices are supplied with 24 V DC.<br />

The green LED "Power" is on due to the voltage at the terminal clamps.<br />

4. Spare parts<br />

Spare part Order No.<br />

Mains Fuse F1 (5 x 20) T 5,0 A 00 0130 41<br />

Output fuse F2 FKS 15 A 00 0132 02<br />

Clamp for input voltage, 3-pole 00 0211 40<br />

Clamp for 0 V and +24 V, 4-pole 00 0211 41<br />

Indicator clamp, 7-pole 00 0211 39<br />

5. <strong>Technical</strong> data<br />

Power supply unit<br />

Input<br />

Order No. 77 3401 00<br />

Nominal input voltage 115 – 230 V AC<br />

Input voltage range 90 – 264 V AC<br />

Input frequency 47 – 63 Hz<br />

Input current 4 A at 115 V AC / 2 A at 230 V AC<br />

Start-up current surge 22 A at 115 V AC / 44 A at 230 V AC, typical<br />

Power factor 0.95 at 230 V AC / 0.98 at 115 V AC under full load<br />

Efficiency<br />

Output<br />

88%, typical<br />

Nominal output current 12,5 A DC<br />

Output voltage 24 V DC +/- 2%<br />

Calculated output power 288 W<br />

Rippling of nominal output current < 100 mVeff<br />

Overload protection, power supply unit,<br />

internal<br />

< 14 A<br />

Overvoltage protection, power supply<br />

unit<br />

26.7 – 32.4 V DC, typical<br />

Overtemperature protection 75 °C +/- 5°C (power diode)<br />

output voltage switched off, automatic re-engaging<br />

EMC CE-certified EN 55022 Class B; ENV 50204<br />

EN 61000-3-2, -3; EN 61000-4-2, -3, -4, -5, -6, -8, -11<br />

Safety EN 60950<br />

Output Safety low voltage SELV<br />

Test voltage PRI – SEC 3 kV<br />

Protection class Class I<br />

Protection<br />

Safety devices<br />

IP 20<br />

Mains Fuse F1 (5 x 20) T 5.0 A<br />

Output fuse F2 FKS<br />

General<br />

15 A FKS<br />

Cooling Convection, free airflow<br />

Permissible ambient temperature 0 ... +50 °C<br />

Storage temperature -25 ... + 60 °C<br />

MTBF 100,000 hours<br />

Weight approx. 2 kg<br />

Dimensions (HxWxD) 244 x 325 x 178 mm<br />

Mounting Wall mounting<br />

Connecting clamps Screw / plug-in clamps<br />

© <strong>Tunstall</strong> <strong>GmbH</strong>, Orkotten 66, 48291 Telgte, Germany, www.tunstall.de, 00 8802 42, Rev. 3.1 (05/2008) English - 3<br />

<strong>Technical</strong> <strong>Manual</strong> Page 143

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!