You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Call switch, order no. 19 0708 00<br />
Connection on terminal, order no. 19 0700 x0, or display module, order no. 19 0700 80, or RAB,<br />
order no. 19 0701 00 (CONCENTO PLUS system)<br />
See table below<br />
Order no. 19 0700 x0<br />
or 19 0700 80<br />
or 19 0701 00<br />
Device Order no.<br />
Display module 19 0700 80<br />
RAB<br />
19 0701 00<br />
Terminal 19 0700 x0<br />
GND<br />
Reassurance light<br />
Call input<br />
+24 V<br />
BK<br />
YE<br />
WH(YE)<br />
RD<br />
IY(ST)Y 2x2x0.8 mm<br />
Call type*) Reassurance light Call input<br />
WC Call WL WR<br />
Call Bed 1 RL R1<br />
Call Bed 2 RL<br />
R2<br />
Call Bed 3 RL R3<br />
WC Call WL R3<br />
Call Bed 1 RL R1<br />
Call Bed 2 RL<br />
R2<br />
*) Note! Many inputs of the display module, RAB and terminals are configurable, i.e the<br />
call type can be changed. In addition there are further inputs available that are also<br />
configurable. For details, read the product leaflets accompanying the respective device.<br />
Several call buttons in the room<br />
Max. 4 call devices can be connected in line or star topology. The max. cable length per input is 20 m. The integrated 120 kOhm<br />
terminating resistor must be active for all call devices (= factory setting).<br />
Caution! Do not change the solder bridge 6. It must always be closed.<br />
00 8814 07, 10/12 (Rev. 2.0) 2<br />
<strong>Technical</strong> <strong>Manual</strong> Page 108<br />
GND<br />
RL<br />
RT<br />
+24 V<br />
Connector 7<br />
on switch<br />
Connection on terminal, order no. 10 0700 x0, or display module, order no. 10 0700 8x, or RAB,<br />
order no. 10 0701 x0 (Concento system)<br />
See table below<br />
GND<br />
Reassurance light<br />
Call input<br />
+24 V<br />
Order no. 10 0700 x0<br />
or 10 0700 8x<br />
or 10 0701 x0<br />
Device<br />
Display module<br />
RAB<br />
Order no.<br />
10 0700 80<br />
10 0701 00<br />
Display module 10 0700 85<br />
RAB<br />
10 0701 20<br />
Call type<br />
BK<br />
YE<br />
WH(YE)<br />
RD<br />
IY(ST)Y 2x2x0.8 mm<br />
GND<br />
RL<br />
RT<br />
+24 V<br />
Connector 7<br />
on switch<br />
Reassurance light Call input<br />
WC Call WL WR<br />
Call Bed 1 RL<br />
RT1<br />
Call Bed 2 RL<br />
RT2<br />
WC Call WL<br />
WR<br />
Call Bed 1 RL<br />
RT1<br />
Call Bed 2 RL<br />
RT2<br />
Call Bed 3 RL<br />
RT3<br />
Terminal 10 0701 x0 WC Call WL WR<br />
Call Bed 1 RL<br />
RT1<br />
Call Bed 2 RL<br />
RT2<br />
configurable RL R5<br />
Terminating resistor<br />
configurable RL R6<br />
Several call devices on one input can be connected in line topology. Star topology is not permissible. The maximum cable length<br />
per input is 15 m.<br />
The integrated 120 kOhm terminating resistor must be active in the case of the last call device at an input.<br />
The integrated 120 kOhm terminating resistor must be inactive in the case of all other call devices at the input.<br />
The terminating resistor is set to active at the factory. The terminating resistor is activated and deactivated via the solder bridge 6<br />
(see Fig. A).<br />
Solder bridge closed<br />
Terminating resistor active (factory setting)<br />
Solder bridge opened (e.g. with knife blade)<br />
Terminating resistor not active<br />
<strong>Tunstall</strong> <strong>GmbH</strong>, Orkotten 66, 48291 Telgte, www.tunstall.de
Change language