Operator's Manual – AutoCycle iC - Ferguson Beauregard

ACiC Operator’s Manual Revision 4 Page 58 of 95
6.11 SMS Command List
6.11.1 Write Only Commands
6.11.2 Read Only Commands
Hotkey Shortcut Description Firmware
Valve Control
0000 SHUTIN Close all valves, force Manual Mode All
6666 ON Manually Start On Cycle All
7777 OFF Manually Start Off Cycle All
Alarms and Schedules
5678 ALARMON Enable Alarms for this phone number All
2468 ALARMOFF Disable Alarms for this phone number All
8888 SCHON Enable Schedule Delivery for this phone number All
9999 SCHOFF Disable Schedule Delivery for this phone number All
Server Controls
4433 Change the server address or host name All
2233 Change the server port number All
8833 TCP Force the device to connect the server All
Plunger Control
56 Clear Plunger Totals All
Table 6.1: Write Only Commands
Hotkey Shortcut Description Firmware
System Information
60 VER Board and Firmware Revisions All
5555 SYS Bat. & Solar Voltage, Firmware Rev., Plunger Counts All
Analog Pressures
501 Instantaneous Casing Pressure All
502 Instantaneous Tubing Pressure All
503 Instantaneous Line Pressure All
3333 PRESS All Pressures (Instant, Min, Max, 24 Hr Average) All
Plunger Control
1111 SETTINGS Plunger Control Timer Settings and Arrival History All
2222 TIMERS Current Running Timers All
53 RT Last 10 Plunger Run Times All
4444 ACIC Yesterday’s Accumulators (Cycles, Plunger Counts, On Time, Off Time, No Arrivals) All
Flow Computer Information
994 FCU Differential Pressure 1.2.0.2+
995 FCU Line Pressure 1.2.0.2+
996 FCU Line Temperature 1.2.0.2+
997 Current Flow Rate 1.2.0.2+
998 Yesterday’s Accumulated Volume 1.2.0.2+
999 Today’s Accumulated Volume 1.2.0.2+
9994 All FCU Information 1.2.0.2+
Table 6.2: Read Only Commands
2913 Specialty Drive • P.O. Box 130158 • Tyler, TX 75713-0158 • Phone: 903-561-4851 • Fax: 903-561-6567