Operator's Manual – AutoCycle iC - Ferguson Beauregard
Operator's Manual – AutoCycle iC - Ferguson Beauregard
Operator's Manual – AutoCycle iC - Ferguson Beauregard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
AC<strong>iC</strong> Operator’s <strong>Manual</strong> Revision 4 Page 87 of 95<br />
7.5 ThermoScientific AutoPILOT<br />
To configure the AutoPILOT unit you will need the AutoCONFIG software provided by ThermoScientific at<br />
http://www.thermoscientific.com. The AutoPILOT does not require the Comm Expansion Module; however it<br />
can be utilized if necessary.<br />
AutoPILOT<br />
! When using Table 7.25, be sure to use the silk<br />
screen on the AutoPILOT for pin numbers. The<br />
terminal blocks may span multiple connectors.<br />
Green<br />
TB1 TB2<br />
Red<br />
TB3 TB4 TB5 TB6 TB7<br />
Figure 7.38: AutoPILOT Wiring Diagram<br />
To AC<strong>iC</strong><br />
Black<br />
Function<br />
AutoPILOT<br />
TB2<br />
A30606VM<br />
Wire Color<br />
RXD Pin 1 Green<br />
CTS Pin 2 Shunt to 4<br />
TXD Pin 3 Red<br />
RTS Pin 4 Shunt to 2<br />
DCD Pin 5 Shunt to 6<br />
+9V Pin 6 Shunt to 5<br />
GND Pin 8 Black<br />
Table 7.25: AutoPILOT Wiring Table<br />
2913 Specialty Drive • P.O. Box 130158 • Tyler, TX 75713-0158 • Phone: 903-561-4851 • Fax: 903-561-6567
Change language