Operator's Manual – AutoCycle iC - Ferguson Beauregard
Operator's Manual – AutoCycle iC - Ferguson Beauregard
Operator's Manual – AutoCycle iC - Ferguson Beauregard
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1.<br />
2.<br />
3.<br />
4.<br />
5.<br />
AC<strong>iC</strong> Operator’s <strong>Manual</strong> Revision 4 Page 92 of 95<br />
Open the AC<strong>iC</strong> in <strong>iC</strong>Connect and choose the System tab.<br />
Set the Modbus slave ID.<br />
Set the Serial port device to External Device and the Serial port protocol to MODBUS slave.<br />
Set the Baud rate to 9600, Data bits to 8, Stop bits to 1, Parity to None, and Flow control to No flow control.<br />
Click the Save button and disconnect from the AC<strong>iC</strong>.<br />
Figure 8.2: AC<strong>iC</strong> Modbus Slave configuration<br />
2913 Specialty Drive • P.O. Box 130158 • Tyler, TX 75713-0158 • Phone: 903-561-4851 • Fax: 903-561-6567
Change language