Operator's Manual – AutoCycle iC - Ferguson Beauregard

ACiC Operator’s Manual Revision 4 Page 83 of 95
10. Click on the Measurement tree and select the Current Values tab.
11. Ensure the numerical identifier corresponds with Table 7.22. If not, write down the numerical identifiers for each
item.
12. From the Operate menu, select File Utilities and select Save and Restore Utility
13. Expand the R: Tree and select Modbus.
14. From the Operate menu, select File Utilities and select Modbus Slave Register Editor.
15. Enter 7001 for Map Start and 6 for # Registers. Select Register List from the View menu.
16. Using Table 7.22, fill in the register numbers.
17. Select Send and enter an appropriate file name of your choice.
18.
19.
20.
Totalflow
Register
Description
Modbus
Register
11.3.0 Static Pressure 7001
11.7.0 Differential Pressure 7002
11.3.3 Temperature 7003
11.7.19 Flow Rate 7004
11.7.22 Today’s Volume 7005
11.7.23 Yesterday’s Volume 7006
Table 7.22: Totalflow Modbus Register Map
Press the Save Station Files button and select an appropriate file directory.
Once the save is completed, answer Yes to restoring files to the S: drive.
Click OK to complete the restore.
Figure 7.32: Totalflow Save Station Files
Figure 7.31: Totalflow Register Map
2913 Specialty Drive • P.O. Box 130158 • Tyler, TX 75713-0158 • Phone: 903-561-4851 • Fax: 903-561-6567