Operator's Manual – AutoCycle iC - Ferguson Beauregard
Operator's Manual – AutoCycle iC - Ferguson Beauregard
Operator's Manual – AutoCycle iC - Ferguson Beauregard
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.<br />
2.<br />
3.<br />
4.<br />
5.<br />
6.<br />
7.<br />
8.<br />
AC<strong>iC</strong> Operator’s <strong>Manual</strong> Revision 4 Page 68 of 95<br />
Use ROCLINK 800 to connect to the FloBoss 103/503.<br />
From the ROC menu, select Comm Ports.<br />
Choose the Comm port being used from the menu.<br />
Use the configuration from Figure 7.7.<br />
Click Apply. Click OK.<br />
Figure 7.7: FloBoss 103/503 Communications<br />
! Ensure no user programs, including but not limited to Modbus Host, are<br />
currently using the COM Port intended to be used as the Modbus Slave.<br />
From the Configure menu, choose Modbus, then Configuration.<br />
Choose Most Significant Byte First.<br />
Click Apply. Click OK.<br />
Figure 7.6: Modbus Host Program<br />
Figure 7.8: FloBoss 103/503 Modbus Configuration<br />
2913 Specialty Drive • P.O. Box 130158 • Tyler, TX 75713-0158 • Phone: 903-561-4851 • Fax: 903-561-6567
Change language