Operator's Manual – AutoCycle iC - Ferguson Beauregard

Recommendations

Info

ACiC Operator’s Manual Revision 4 Page 58 of 95 6.11 SMS Command List 6.11.1 Write Only Commands 6.11.2 Read Only Commands Hotkey Shortcut Description Firmware Valve Control 0000 SHUTIN Close all valves, force Manual Mode All 6666 ON Manually Start On Cycle All 7777 OFF Manually Start Off Cycle All Alarms and Schedules 5678 ALARMON Enable Alarms for this phone number All 2468 ALARMOFF Disable Alarms for this phone number All 8888 SCHON Enable Schedule Delivery for this phone number All 9999 SCHOFF Disable Schedule Delivery for this phone number All Server Controls 4433 Change the server address or host name All 2233 Change the server port number All 8833 TCP Force the device to connect the server All Plunger Control 56 Clear Plunger Totals All Table 6.1: Write Only Commands Hotkey Shortcut Description Firmware System Information 60 VER Board and Firmware Revisions All 5555 SYS Bat. & Solar Voltage, Firmware Rev., Plunger Counts All Analog Pressures 501 Instantaneous Casing Pressure All 502 Instantaneous Tubing Pressure All 503 Instantaneous Line Pressure All 3333 PRESS All Pressures (Instant, Min, Max, 24 Hr Average) All Plunger Control 1111 SETTINGS Plunger Control Timer Settings and Arrival History All 2222 TIMERS Current Running Timers All 53 RT Last 10 Plunger Run Times All 4444 ACIC Yesterday’s Accumulators (Cycles, Plunger Counts, On Time, Off Time, No Arrivals) All Flow Computer Information 994 FCU Differential Pressure 1.2.0.2+ 995 FCU Line Pressure 1.2.0.2+ 996 FCU Line Temperature 1.2.0.2+ 997 Current Flow Rate 1.2.0.2+ 998 Yesterday’s Accumulated Volume 1.2.0.2+ 999 Today’s Accumulated Volume 1.2.0.2+ 9994 All FCU Information 1.2.0.2+ Table 6.2: Read Only Commands 2913 Specialty Drive • P.O. Box 130158 • Tyler, TX 75713-0158 • Phone: 903-561-4851 • Fax: 903-561-6567
ACiC Operator’s Manual Revision 4 Page 59 of 95 6.11.3 Read-Write Commands Hotkey Description Type Firmware Plunger Control Timers 1 Fast Time Time All 2 Slow Time Time All 3 Tubing On Time Time All 4 Tubing Off Time Time All 5 Minimum Off Time Time All 6 Afterflow Time All 7 Minimum Afterflow Time All 8 Maximum Afterflow Time All 26 Maximum Off Time Time All 102 Recovery Off Time Time All Plunger Control Adjustments 9 Deduct From Off Time (Fast Arrival) Time All 10 Add to Afterflow (Fast Arrival) Time All 11 Add to Off Time (Slow Arrival) Time All 12 Deduct from Afterflow (Slow and No Arrival) Time All 13 Add to Off Time (No Arrival) Time All Plunger Control Counters 15 Initial Fast Arrival Counter Integer All 16 Current Fast Arrival Counter Integer All 17 Initial Good Arrival Counter Integer All 18 Current Good Arrival Counter Integer All 19 Initial Slow Arrival Counter Integer All 20 Current Slow Arrival Counter Integer All 21 Initial No Arrival Counter Integer All 22 Current No Arrival Counter Integer All Additional RTU Behavior Options 23 Sync Mode Enable (0 = False, 1 = True) Integer All 24 Sync Mode Flow Time Time All 25 Plunger Catch Mode (0 = False, 1 = True) Integer All Tank Timers 30 Tank Delay Time Time All 31 Tank On Time Time All Pressure Override Adjustments 70 Open Tubing if CP >= Integer All 71 Open Tubing if TP >= Integer All 100 Open if Tubing – Line >= Integer All 101 Open if Fluid Slug = (No Arrival) Integer All 81 Deduct from Open if TP >= (Fast Arrival) Integer All 82 Add to Open if TP >= (Slow Arrival) Integer All 2913 Specialty Drive • P.O. Box 130158 • Tyler, TX 75713-0158 • Phone: 903-561-4851 • Fax: 903-561-6567
Page 1 and 2:
Operator’s Manual Revision: 4 Rev
Page 3 and 4:
ACiC Operator’s Manual Revision 4
Page 5 and 6:
ACiC Operator’s Manual Revision 4
Page 7 and 8: ACiC Operator’s Manual Revision 4
Page 57: ACiC Operator’s Manual Revision 4
Page 73 and 74: 1. 2. 3. 4. 5. 6. 7. 8. 9. ACiC Ope
Page 77 and 78: 1. 2. 3. 4. 5. 6. ACiC Operator’s
Page 85 and 86: 1. 2. 3. 4. 5. 6. 7. ACiC Operator
Page 95: 8. 9. ACiC Operator’s Manual Revi
show all

Operator's Manual – AutoCycle iC - Ferguson Beauregard

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?