Saved by My Dentist - New Solutions to a Health ... - Get a Free Blog

(3) A final computerized electro-dermal screening will check
the vitality of the tooth.
The Teeth and Body Energy chart is inserted in the back of this
book.
Here is the Computerized Electro-Dermal Screening Protocol
from my website www.dentistryhealth.com. The following
information assumes the operator has a basic knowledge of
computerized electro-dermal screening. Tooth location is
numbered from upper right, to upper left, from lower left to
lower right. They number from one to thirty-two.
Please refer to the Teeth and Body Energy chart, for the exact
position of the teeth to those tissue systems that each tooth is
related. A detailed knowledge of the chart is important in
understanding the mouth and its relationship to your patient‟s
health. The following procedure is used to evaluate the mouth
and its energetic relationship to organs and tissue systems. Be
aware of false negatives, the test says there is a problem when
actually there is not a problem, and why a tooth may appear
compromised due to outside interference fields. This protocol
will also help to differentiate between dental materials and
diseased teeth that cause abnormal signals.
Procedure:
Let us begin with an evaluation of a patient coming to the
office for Computerized Electro-Dermal screening. Bring up the
signal point screen or make your individual screen for dental
checking. The conductance points I use will vary from two to
three points for each meridian on one hand. These points are as
follows: Ly 1, CMP Ly, Ly2, Lu 11, LU CMP, Lu 10.5, LI 1, CMP
LI, LI 2, LI 3, LI 4, ND 1a, CMP ND, ND 3, Cir 9, CMP Cir, Al 1,
CMP Al, Al 3, CMP OD, TW 1, CMP TW, TW 3, H 9, CMP H, H 8a,
SI 1, CMP SI, SI 2. The purpose of these conductance points is
to establish a base value for the meridians.
144