User's Manual TNC 360 (from 259 900-11) - heidenhain

7 Programming with Q Parameters
7.5 Checking and Changing Q Parameters
7-10
Q parameters can be checked during program run or during a test run, and
changed if necessary.
Preparation:
• A running program must be aborted (e.g. press machine STOP button
and STOP key)
• If you are doing a test run, you must interrupt it
To call a Q parameter:
Q
Q =
e.g.
e.g.
1 0 ENT
Q10 = + 100
The TNC displays the current value.
0 ENT
ENT
Select desired parameter (in this example, Q10).
Change Q parameter (in this example, Q10 is changed to 0).
Leave the Q parameter unchanged.
TNC 360