User's Manual TNC 360 (from 259 900-11) - heidenhain

4 Programming
4.1 Editing Part Programs
4-4
Inserting blocks
Additional program blocks can be inserted behind any existing block
(except the PGM END block).
or
Program the new block.
GOTO
Select the block in front of the desired insertion.
The block numbers of all subsequent blocks automatically increase by one.
Editing and inserting words
Highlighted words can be changed as desired: simply overwrite the old
value with the new one. Plain language dialog indicates the type of
information required. After entering the new information, press a horizontal
cursor key or the END key to confirm the change.
In addition to changing the existing words in a block, you can also add
new words with the aid of the plain language dialog.
Erasing blocks and words
Function Key
• Set the selected number to 0
• Erase an incorrect number
• Clear a non-blinking error message
• Delete the selected word
• Delete the selected block
• Erase cycles and program sections:
First select the last block of the cycle or
program section to be erased.
CE
CE
CE
NO
ENT
DEL
DEL
TNC 360