User's Manual TNC 360 (from 259 900-11) - heidenhain

5 Programming Tool Movements
5.4 Path Contours – Cartesian Coordinates
5-10
.
.
.
TOOL RADIUS COMP.: RL / RR / NO COMP. ?
R- L
R + R
ENT
FEED RATE F = ? / F MAX = ENT
e.g. 1 0 0
ENT
MISCELLANEOUS FUNCTION M?
e.g. 3 ENT
Resulting NC block: L IX–50 Y+10 Z–20 RR F100 M3
ENT
The tool must move to the left of the programmed contour to compensate
its own radius.
The tool must move to the right of the programmed contour to
compensate its own radius.
The tool moves directly to the end point.
Enter the feed rate of the tool on the straight line, for example
100 mm/min.
Enter rapid tool traverse, F = FMAX.
Enter a miscellaneous function, if appropriate, for example M3
(spindle on, clockwise rotation).
TNC 360