Hiring of VPN Services for GAIL Agartala

More documents

Recommendations

Info

may be extended for the part of the particular job at the discretion of the ENGINEER-IN- CHARGE, for only such alterations, additions or substitutions of the WORK, as he may consider as just and reasonable. The rates for such additional, altered or substituted WORK under this clause shall be worked out in accordance with the following provisions:- I. For Item Rate Contract a) If the rates for the additional, altered or substituted WORK are specified in the CONTRACT for the WORK, the CONTRACTOR is bound to carry on the additional, altered or substituted WORK at the same rates as are specified in the CONTRACT. b) If the rates for the additional, altered or substituted WORK are not specifically provided in the CONTRACT for the WORK, the rates will be derived from the rates for similar class of WORK as are specified in the CONTRACT for the WORK. The opinion of the ENGINEER-IN- CHARGE, as to whether or not the rates can be reasonably so derived from the items in this CONTRACT will be final and binding on the CONTRACTOR. c) If the rates for the altered, additional or substituted WORK cannot be determined in the manner specified in sub-clause(s) and (b) above, then the CONTRACTOR shall, within 7 days of the date of receipt of order to carry out the WORK, inform the ENGINEER-IN-CHARGE of the rates which it is his intention to charge for such class of WORK, supported by analysis of the rate or rates claimed, and the ENGINEER-IN-CHARGE shall determine the rate or rates on the basis of the prevailing market rates, labour cost at schedule of labour rates plus 10% to cover contractor's supervision, overheads and profit and pay the CONTRACTOR accordingly. The opinion of the ENGINEER- IN-CHARGE as to current market rates of materials and the quantum of labour involved per unit of measurement will be final and binding on the CONTRACTOR. d) Where the item of work will be executed through nominated specialist agency as approved by the ENGINEER-IN-CHARGE, then the actual amount paid to such nominated agency supported by documentary evidence and as certified by ENGINEER-IN-CHARGE shall be considered plus 82
83 10% (ten percent) to cover all contingencies, overhead, profits to arrive at the rates. e) Provisions contained in the Sub-clause (a) & (d) above shall, however, not apply for the following:- Where the value of additions of new items together with the value of alterations, additions/deletions or substitutions does not exceed by or is not less than plus/minus (+_)25% of the VALUE OF CONTRACT. The item rates in the Schedule of Rates shall hold good for all such variations between the above mentioned limits, irrespective of any increase/decrease of quantities in the individual items of Schedule of Rates. Where the value of addition of new items together with the value of alterations, additions/deletions or substitutions reduces more than 25% of the contract value but is within the following limits the tenderer shall be paid compensation for decrease in the value of work, as follows: S.No. Range of Variation Percentage compensation for decrease in the value of work in the respective range. a) Beyond (+) 25% upto & No increase and/ or decrease inclusive of (+) 50% shall be applicable for the Schedule of Rates (The rates quoted for this increase shall be valid). Beyond (-) 25% upto & For reduction beyond 25% inclusive of (-) 50% contractor shall be compensated by an amount equivalent to 10% of the reduction in value of the contract as awarded. For example if the actual contract value is 70% of awarded value then compensation shall be 10% of (75-70) i.e. 0.5% of awarded contract value. II. For Lumpsum Contracts CONTRACTOR shall, within 7 days of the date of receipt of order to carry out the WORK, inform the
Page 1 and 2:
GAIL (India) Limited 16, Bhikaji Ca
Page 3 and 4:
TENDER NO.: GAIL/ND/C&P-MKTG/GT/14/
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32: TENDER NO.: GAIL/ND/C&P-MKTG/GT/14/
Page 43 and 44: Company (other than the CONTRACTOR)
Page 45 and 46: 1.1.28 "METRIC SYSTEM" - All techni
Page 47 and 48: than 500 m away from the CONTRACTOR
Page 49 and 50: CONTRACTOR shall fail to comply wit
Page 51 and 52: audited. x) Details of present comm
Page 53 and 54: 5. Transfer of Tender Documents: of
Page 55 and 56: 11 Tenderer’s Responsibility; 12
Page 57 and 58: Tenderer is in doubt about the comp
Page 59 and 60: 23 Contractor to obtain his own Inf
Page 61 and 62: Guarantee or through an irrevocable
Page 63 and 64: obligation of the party affected by
Page 65 and 66: a) TO DETERMINE THE CONTRACT in whi
Page 67 and 68: may give notice in writing to the C
Page 69 and 70: 36. Contractor's subordinate staff
Page 71 and 72: Notwithstanding any sub-letting wit
Page 73 and 74: 39. Contractor's responsibility wit
Page 75 and 76: EMPLOYER as a result such failure w
Page 77 and 78: 46. Payment if the contract is term
Page 79 and 80: advertising, publicity, sales relea
Page 81: 60. Alterations in specifications,
Page 85 and 86: ENGINEER-IN-CHARGE. "Certified true
Page 87 and 88: 66. Stores supplied by the employer
Page 89 and 90: 68. Material procured with assistan
Page 91 and 92: 73. Inspection of works: 73.1 The E
Page 93 and 94: 77. Suspension of works: 78. Employ
Page 95 and 96: 95 defective or not in accordance w
Page 97 and 98: such time as may be reasonably nece
Page 99 and 100: ENGINEER-IN-CHARGE as to the items
Page 101 and 102: 88.1.1 All measurements shall be re
Page 103 and 104: such claim and no delay in dealing
Page 105 and 106: CONTRACTOR after verifying from the
Page 107 and 108: SECTION-VII Taxes and Insurance 98.
Page 109 and 110: the insurance coverage risk and in
Page 111 and 112: 111 the Employership of such vehicl
Page 113 and 114: 113 the EMPLOYER harmless of all cl
Page 115 and 116: 104 Implementation of apprentices a
Page 117 and 118: and binding as provided in the Agre
Page 119 and 120: 111 First aid and industrial injuri
Page 121 and 122: 115 Excavation and trenching: 116 D
Page 123 and 124: iii) When the work is done near any
Page 125 and 126: 117 Care in handling inflammable ga
Page 127 and 128: Section-6 Schedule of Rates 127
Page 129 and 130: Section - 7 Forms & Formats 129
Page 131 and 132: To M/S. GAIL(India) LTD. 16, Bhikai
Page 133 and 134:
Annual Turnover data for the last 3
Page 135 and 136:
F-4 PROFORMA FOR BANK GUARANTEE FOR
Page 137 and 138:
F-5 LETTER OF AUTHORITY PROFORMA FO
Page 139 and 140:
M/S. GAIL(India) LTD. 16, Bhikaiji
Page 141 and 142:
Full Postal Address and phone nos o
Page 143 and 144:
on demand, a penal interest of 18%
show all

Hiring of VPN Services for GAIL Agartala

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?