Hiring of VPN Services for GAIL Agartala

More documents

Recommendations

Info

61. Drawings to be supplied by the employer 62. Drawings to be supplied by the contractor: 84 ENGINEER-IN- CHARGE of the rates which it is his intention to charge for such class of WORK, supported by analysis of the rate or rates claimed, and the ENGINEER-IN-CHARGE shall determine the rate or rates on the basis of the prevailing market rates, labour cost at schedule of labour rates plus 10% to cover contractor's supervision, overheads and profit and pay the CONTRACTOR accordingly. The opinion of the ENGINEER- IN-CHARGE as to current market rates of materials and the quantum of labour involved per unit of measurement will be final and binding on the CONTRACTOR. 61.1 The drawings attached with tender are only for the general guidance to the CONTRACTOR to enable him to visualize the type of work contemplated and scope of work involved. The CONTRACTOR will be deemed to have studied the DRAWINGS and formed an idea about the WORK involved. 61.2 Detailed working drawings on the basis of which actual execution of the WORK is to proceed, will be furnished from time to time during the progress of the work. The CONTRACTOR shall be deemed to have gone through the DRAWINGS supplied to him thoroughly and carefully and in conjunction with all other connected drawings and bring to the notice of the ENGINEER-IN-CHARGE discrepancies, if any, therein before actually carrying out the Work. 61.3 Copies of all detailed working drawings relating to the WORK shall be kept at the CONTRACTOR's office on the site and shall be made available to the ENGINEER-IN- CHARGE at any time during the CONTRACT. The drawings and other documents issued by the EMPLOYER shall be returned to the EMPLOYER on completion of the WORK. 62.1 The drawings/date which are to be furnished by the CONTRACTOR are enumerated in the special conditions of contract, and shall be furnished within the specified time. 62.2 Where approval/review of drawings before manufacture/ construction/fabrication has been specified, it shall be CONTRACTOR's responsibility to have these drawings prepared as per the directions of ENGINEER-IN-CHARGE and got approved before proceeding with manufacture/construction/fabrication as the case may be. Any change that may have become necessary in these drawings during the execution of the work shall have to be carried out by the CONTRACTOR to the satisfaction of ENGINEER-IN-CHARGE at no extra cost. All final drawings shall bear the certification stamp as indicated below duly signed by both the CONTRACTOR and
ENGINEER-IN-CHARGE. "Certified true for ___________________________________ (Name of Work) Agreement No._____________________________________________ Signed:_________________ _________________ (CONTRACTOR) (ENGINEER-IN-CHARGE) 62.3 The DRAWINGS submitted by the CONTRACTOR shall be reviewed by the ENGINEER-IN-CHARGE as far as practicable within 3 (Three) weeks and shall be modified by the CONTRACTOR, if any modifications and/or corrections are required by the ENGINEER-IN-CHARGE. The CONTRACTOR shall incorporate such modifications and/or corrections and submit the final drawings for approval. Any delays arising out of failure by the CONTRACTOR to rectify the drawing in good time shall not alter the Contract Completion Time. 62.4 As built drawings showing all corrections, adjustments etc. shall be furnished by the CONTRACTOR in six copies and one transparent for record purposed to the EMPLOYER. 63. Setting out works: 63.1 The ENGINEER-IN-CHARGE shall furnish the CONTRACTOR with only the four corners of the Works site and a level bench mark and the CONTRACTOR shall set out the Works and shall provide an efficient staff for the purpose and shall be solely responsible for the accuracy of such setting out. 63.2 The CONTRACTOR shall provide, fix and be responsible for the maintenance of all stakes, templates, level marks, profiles and other similar things and shall take all necessary precautions to prevent their removal or disturbance and shall be responsible for the consequence of such removal or disturbance should the same take place and for their efficient and timely reinstatement. The CONTRACTOR shall also be responsible for the maintenance of all existing survey marks, boundary marks, distance marks and center line marks, either existing or supplied and fixed by the CONTRACTOR. The work shall be set out to the satisfaction of the ENGINEER-IN-CHARGE. The approval there of joining with the CONTRACTOR by the ENGINEER- IN-CHARGE in setting out the work, shall not relieve the CONTRACTOR of any of his responsibility. 63.3 Before beginning the Works, the CONTRACTOR shall at his 85
Page 1 and 2:
GAIL (India) Limited 16, Bhikaji Ca
Page 3 and 4:
TENDER NO.: GAIL/ND/C&P-MKTG/GT/14/
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34: TENDER NO.: GAIL/ND/C&P-MKTG/GT/14/
Page 43 and 44: Company (other than the CONTRACTOR)
Page 45 and 46: 1.1.28 "METRIC SYSTEM" - All techni
Page 47 and 48: than 500 m away from the CONTRACTOR
Page 49 and 50: CONTRACTOR shall fail to comply wit
Page 51 and 52: audited. x) Details of present comm
Page 53 and 54: 5. Transfer of Tender Documents: of
Page 55 and 56: 11 Tenderer’s Responsibility; 12
Page 57 and 58: Tenderer is in doubt about the comp
Page 59 and 60: 23 Contractor to obtain his own Inf
Page 61 and 62: Guarantee or through an irrevocable
Page 63 and 64: obligation of the party affected by
Page 65 and 66: a) TO DETERMINE THE CONTRACT in whi
Page 67 and 68: may give notice in writing to the C
Page 69 and 70: 36. Contractor's subordinate staff
Page 71 and 72: Notwithstanding any sub-letting wit
Page 73 and 74: 39. Contractor's responsibility wit
Page 75 and 76: EMPLOYER as a result such failure w
Page 77 and 78: 46. Payment if the contract is term
Page 79 and 80: advertising, publicity, sales relea
Page 81 and 82: 60. Alterations in specifications,
Page 83: 83 10% (ten percent) to cover all c
Page 87 and 88: 66. Stores supplied by the employer
Page 89 and 90: 68. Material procured with assistan
Page 91 and 92: 73. Inspection of works: 73.1 The E
Page 93 and 94: 77. Suspension of works: 78. Employ
Page 95 and 96: 95 defective or not in accordance w
Page 97 and 98: such time as may be reasonably nece
Page 99 and 100: ENGINEER-IN-CHARGE as to the items
Page 101 and 102: 88.1.1 All measurements shall be re
Page 103 and 104: such claim and no delay in dealing
Page 105 and 106: CONTRACTOR after verifying from the
Page 107 and 108: SECTION-VII Taxes and Insurance 98.
Page 109 and 110: the insurance coverage risk and in
Page 111 and 112: 111 the Employership of such vehicl
Page 113 and 114: 113 the EMPLOYER harmless of all cl
Page 115 and 116: 104 Implementation of apprentices a
Page 117 and 118: and binding as provided in the Agre
Page 119 and 120: 111 First aid and industrial injuri
Page 121 and 122: 115 Excavation and trenching: 116 D
Page 123 and 124: iii) When the work is done near any
Page 125 and 126: 117 Care in handling inflammable ga
Page 127 and 128: Section-6 Schedule of Rates 127
Page 129 and 130: Section - 7 Forms & Formats 129
Page 131 and 132: To M/S. GAIL(India) LTD. 16, Bhikai
Page 133 and 134: Annual Turnover data for the last 3
Page 135 and 136:
F-4 PROFORMA FOR BANK GUARANTEE FOR
Page 137 and 138:
F-5 LETTER OF AUTHORITY PROFORMA FO
Page 139 and 140:
M/S. GAIL(India) LTD. 16, Bhikaiji
Page 141 and 142:
Full Postal Address and phone nos o
Page 143 and 144:
on demand, a penal interest of 18%
show all

Hiring of VPN Services for GAIL Agartala

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?