LibreOffice 3.6 Writer Guide - The Document Foundation Wiki

Figure 124: Defining a two-column borderless table with no header
3) Right-click on the table and choose Table from the pop-up menu. On the Columns page of
the Table Format dialog box, make the columns the required width.
Figure 125: Defining a two-column table to line up with text offset at 1.2 inches
4) On the Table page of the Table Format dialog box (Figure 126), in the Spacing section,
make the Above and Below values the same as the Top and Bottom spacing you have
defined for ordinary paragraphs of text. Click OK to save your settings.
Tip
To check the top and bottom spacing for ordinary paragraphs:
1) Position the cursor in a paragraph and press F11 (unless the Styles and
Formatting window is already open). Check that the Styles and Formatting
window shows paragraph styles (top left button).
2) The current style should be highlighted. If no paragraph style is highlighted,
select All Styles in the bottom drop-down list. Right-click on it and select
Modify from the pop-up list.
3) Go to the Indents & Spacing page and look in the Spacing area for the values
in Above paragraph and Below paragraph.
Chapter 4 Formatting Pages 125