31.12.2013 Views

Linkage Kit Manual V6-00 - Fujitsu

Linkage Kit Manual V6-00 - Fujitsu

Linkage Kit Manual V6-00 - Fujitsu

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CHAPTER 5 SPECIFICATIONS OF A LINKER<br />

■ Mixing FR Objects and FR80 Objects or FR81 Objects<br />

The linker (flnk911s) outputs a warning when the objects for FR are mixed, if the target CPU specified by<br />

-cpu option is FR80 or FR81.<br />

This warning can be changed, by the object mix check level option (-omcl), to an error or the mixing<br />

allowed.<br />

Please refer to Section "6.2.35 Object Mix Check Level Specification (-omcl)" for details of the -omcl<br />

option.<br />

Note:<br />

The following instructions can not be used when target CPU is FR80 or FR81.<br />

LDRES @Ri+,#u4<br />

STRES #u4,@Ri<br />

COPOP #u4,#CC,CRj,CRi<br />

COPLD #u4,#CC,Rj,CRi<br />

COPST #u4,#CC,CRj,Ri<br />

COPSV #u4,#CC,CRj,Ri<br />

■ Mixing FR81 with FPU Objects and FR81 without FPU Objects or FR80 Objects or FR<br />

Objects<br />

The linker (flnk911s) outputs a warning when the objects for FR81 without FPU or FR80 or FR are mixed,<br />

if the target CPU specified by -cpu option is FR81 with FPU.<br />

This warning can be changed, by the object mix check level option (-omcl), to an error or the mixing<br />

allowed.<br />

Please refer to Section "6.2.35 Object Mix Check Level Specification (-omcl)" for details of the -omcl<br />

option.<br />

88 PART II LINKER

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!