Linkage Kit Manual V6-00 - Fujitsu

APPENDIX A ERROR MESSAGES OF THE LINKAGE KIT
E4351L
Relocatable assemble list not correspond to object file (file name)
No object corresponding to the relative assemble list file indicated by the supplementary message is found.
The linker stops processing of the list file indicated by the supplementary message, and proceeds with
processing of the next list file.
E4352L
Relocatable assemble list file not found (file name)
The relative format assemble list file indicated by the supplementary message is not found.
The linker does not create an absolute format assemble list file corresponding to the file name indicated by
the supplementary message, and continues processing.
E4354L
Illegal relocatable assemble list file format (file name)
The linker cannot process the format of the relative assemble list file indicated by the supplementary
message.
The linker stops processing of the list file indicated by the supplementary message, and proceeds with
processing of the next list file.
E4355L
Object data not correspond (file name)
Object data of the absolute format load module file and source data of the relative format assemble list
indicated by the supplementary message do not match.
Rerun the program after reassembling.
E4357L Too many array dimension or structure nested : exceeded 8
The number of dimensions of an array output to the ARRAY list or that of nesting levels of a structure
exceeds 8.
Processing continues, but those parts which exceed this limit are not output.
323