Linkage Kit Manual V6-00 - Fujitsu

APPENDIX A ERROR MESSAGES OF THE LINKAGE KIT
E4305L
Unresolved external symbol (mangle name / symbol name)
Because the definition of the external definition symbol could not be found, relocation could not be carried
out.
This message is notified if the external definition symbol specified by the -df option cannot be found.
It is necessary to combine the modules contained the external definition symbol.
E4312L
Uncompatible cpu type module (file name)
The file displayed here is an incompatible module.
The target CPU for input modules must be the same or a compatible CPU.
For detail, please refer to Section "5.12 Mixing of Objects for a Linker" for details.
E4319L
Section not exists (section name)
The section specified by the grouping option(-gr) cannot be found.
This message is also notified if the section indicated here is an absolute section, since it is not intended for
section relocation.
E4326L
Different symbol type (mangle name / symbol name)
This message is notified if the external definition symbol specified when an entry point was set
using the -e option is neither function name nor variable name nor address label name.
E4327L
Illegal RL information
This message is notified if any error in relocation information is found.
321