Linkage Kit Manual V6-00 - Fujitsu

APPENDIX A ERROR MESSAGES OF THE LINKAGE KIT
E4404U
Invalid module : type (file name)
Only the object module format output by the assembler can be registered in the library file. The absolute
format and relative format load modules output by the linker cannot be registered.
E4405U
Invalid module : conflict tool name (file name)
This is not an object file output by the family assembler that can be handled by this librarian.
E4406U
Invalid module : conflict compile model (file name)
A module of a different compile model (such as the memory model) cannot be registered in the same
library.
E4407U
Invalid module : conflict CPU type (file name)
A module of a different CPU type cannot be registered in the same library.
Or , the library file which is different from the target CPU is specified.
E4412U
Uncompatible cpu type module (file name)
The file displayed here is an incompatible module.
The target CPU for input modules must be the same or a compatible CPU.
For detail, please see Section "9.9 Mixing of Objects for a Librarian".
335