Linkage Kit Manual V6-00 - Fujitsu

APPENDIX
F9001L
Insufficient memory
Enough memory is not available to execute the program. If the linker is activated from a batch file, start
the program directly from the command line.
F9011L
Input file not found (file name)
The specified input file cannot be found.
F9012L
Library file not found (file name)
If the name of the file indicated here is a default library file, the following things are the causes.
When the environment variable LIB911 is set up.
- The library file is not stored in the directory indicated by the environmental variable LIB911
When the environment variable LIB911 is not set up.
- The library file is not stored in the directory derived from the environmental variable FETOOL
If the file is a library file specified by the -l or -el option, check whether the file name is specified correctly
or the retrieval path specified in the -L option is correct.
F9015L
File open error (file name)
If the file indicated here is an output file, it is possible that the number of files that can be managed by one
directory is exceeded. Remove or move unnecessary files.
F9016L
File read error (file name)
It is probable that the file is read-protected.
326