31.12.2013 Views

Linkage Kit Manual V6-00 - Fujitsu

Linkage Kit Manual V6-00 - Fujitsu

Linkage Kit Manual V6-00 - Fujitsu

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

15.3 Details of Load Module Converter Options<br />

15.3.5 Specifying to Adjust (-adjust)<br />

This option automatically calls the adjuster for adjustment after converting the load<br />

module.<br />

■ Specifying to Adjust (-adjust)<br />

[Format]<br />

-adjust<br />

[Parameter]<br />

None<br />

[Description]<br />

This option automatically calls the adjuster for adjustment after converting the load module.<br />

The starting/ending addresses to be adjusted are automatically set.<br />

If the starting/ending address parameters are specified with the padding (-p) option when this option is<br />

given, an error occurs.<br />

When this option is specified, the option for the adjuster can also be specified.<br />

[Example]<br />

f2ms ccp903 -p 0xEF,0x1FE4,0x1FFF -adjust<br />

Because the starting/ending addresses are specified with the padding option, an error occurs.<br />

f2ms ccp903 -p 0xEF -adjust<br />

This option converts the absolute format load module to an adjusted S format. In this case, it pads the<br />

location where no data exists with data named 0xEF.<br />

PART IV OBJECT FORMAT CONVERTERS 273

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!