Linkage Kit Manual V6-00 - Fujitsu

16.3 Details of Options of the Format Adjuster
16.3.3 Specifying the S Format Output (-S1/-S2/-S3)
Use this option to specify an S format to be used when data is output.
This option is for the S format adjuster (m2ms).
■ Specifying the S Format Output (-S1/-S2/-S3)
[Format]
-S1
-S2
-S3
[Parameter]
None
[Description]
Use this option to specify a record to be used when data contents are output.
The S format adjuster outputs the data contents using one of the S1, S2, and S3 records.
It never outputs data using both the S1 and S2 records.
If more than one of the -S1, -S2, and -S3 options are specified, the one most recently specified is valid.
If none of the -S1, -S2, and -S3 options are specified, the S format adjuster outputs the data contents
into the S3 record.
Note:
If the specification in this option and the output range are not consistent with each other, the S
format adjuster reports an error and performs no processing.
Specifying this option changes the terminator record to be used for output (S9, S8, and S7 records).
(See Table 16.3-1)
Table 16.3-1 List of Output Record Specifications
Specification Range of data that can be output Terminator record Remarks
-S1 0x0000-0xFFFF S9 record
-S2 0x000000-0xFFFFFF S8 record
-S3 0x00000000-0xFFFFFFFF S7 record (Default)
PART IV OBJECT FORMAT CONVERTERS 287