Linkage Kit Manual V6-00 - Fujitsu

APPENDIX A ERROR MESSAGES OF THE LINKAGE KIT
W1367L
Duplicated module name (file name module name)
The same module name already exists as that intended for linking.
Duplicated module names are not allowed because the problem, such as the correct modules is not specified
at the time of creating the absolute assemble list and debugging is generated.
Please, change the module names.
The C/C++ compiler automatically generates the module name from the file name.
Please, change the file names.
W1368L
The area specified for the -ro option is outside the internal-ROM area
(area name)
The area specified for the -ro option is outside the internal-ROM area.
Check whether the specified area is correct.
This warning is output even if warning output suppression (-w 0) is specified.
W1369L
The area specified for the -ra option is outside the internal-RAM area
(area name)
The area specified for the -ra option is outside the internal-RAM area.
Check whether the specified area is correct.
This warning is output even if warning output suppression (-w 0) is specified.
W1370L
The section is placed outside the ROM area (section name)
The section that should be placed within the ROM area is placed outside the ROM area.
Check the map file to see if the placement is correct.
This warning is output even if warning output suppression (-w 0) is specified.
W1371L
The section is placed outside the RAM area (section name)
The section that should be placed within the RAM area is placed outside the RAM area.
Check the map file to see if the placement is correct.
This warning is output even if warning output suppression (-w 0) is specified.
319