Linkage Kit Manual V6-00 - Fujitsu

1.4 End Code
1.4 End Code
Each tool of linkage kit returns the end status of its processing to OS as the end code.
■ End Code Value and End Status
Each linkage kit tool returns the end status of the processing (whether the processing has ended normally or
an error has occurred) to the OS as the end code. Table 1.4-1 shows the relation between the end codes and
end status of processing.
Table 1.4-1 End Codes and End Status of Processing
End code
End status of processing
0 When ended normally or when an error of warning level occurs.
1 When an error of warning level occurs with the -cwno option specified
2 When an error occurs making it impossible to achieve the correct output result
3 When a fatal error occurs making it impossible to continue processing
PART I LINKAGE KIT 7