Linkage Kit Manual V6-00 - Fujitsu

5.10 CPU Information File
5.10 CPU Information File
The linker specifies the CPU from -cpu option and automatically specifies the ROM/RAM
areas from the CPU information file.
■ CPU Information
The linker specifies the CPU from the -cpu option and selects the information of the appropriate chip to
automatically specify the ROM/RAM areas from the CPU information file.
■ ROM/RAM Areas Names
The linker sets the following names for the ROM/RAM areas.
• ROM Areas:_ROM_*_
Numbers are entered at the asterisk (*) in order from the lower address region starting from 1. If there is
only 1 area, the number will be ’_ROM_1_’.
• RAM Areas:_RAM_*_
Numbers are entered at the asterisk (*) in order from the lower address region starting from 1. If there is
only 1 area, the number will be ’_RAM_1_’.
These names are used by the -sc options.
■ CPU Information File
The following shows the CPU information file name and the search directory.
● CPU Information file name
• 911.csv
● Search Directory
• %FETOOL%\LIB\911
■ Specifies to Prevent the Internal ROM/RAM Area from being Set Automatically
The linker specifies the CPU from the -cpu option by default and selects the appropriate chip information
from the CPU information file to automatically set the ROM/RAM areas. Specify the -Xset_rora option
when you want to deter this function.
Note:
If the CPU information file cannot be found, or the appropriate MB number in the CPU information
file does not exist, the linker will issue an error.
PART II LINKER 85