Linkage Kit Manual V6-00 - Fujitsu

CHAPTER 6 LINKER OPTIONS
6.1 List of Linker Options
Options are available to specify linker operations in more detail.
■ List of Linker Options
Table 6.1-1 shows the list of linker options.
Table 6.1-1 List of Linker Options (1 / 3)
Input/output control options
Specification
regarding output
load modules
Specification
regarding output
lists
Specification
regarding output
messages
Allocation/link
options
Function Option Remarks
Output load module file name specification -o Default
Output debug information specification -g
Debug information delete specification -Xg Default
Specification of outputting absolute format load
module
-a Default
Specification of outputting relative format load
module
-r
Specifying padding data -p Default 0
Specification to fill ROM area
-fill
Specification for external symbol information output
-symtab
Specification for inhibiting the external symbol
information output
-Xsymtab Default
Map list file name specification -m Default
Specification for inhibiting map list output -Xm
Cancellation of omitting names displayed in the
list
-dt
Output Specification of the Memory Used Information
List
-mmi
Disable Output of Demangled Symbol Name -Xdemangle
Enable Output of Demangled Symbol Name -demangle Default
Specification of the number of digits in the list line Default
-pw
80
Specification of the number of lines on one list
page
-pl Default 0
Checksum specification of ROM area
-cs
Warning message output level specification
-w Default 1
ROM area specification
-ro
RAM area specification
-ra
Section allocation
-sc
Section group specification
-gr
Pack link specification
-pk
Automatic allocation specification -AL Default 0
92 PART II LINKER