Linkage Kit Manual V6-00 - Fujitsu

APPENDIX
W1406U
Module not exists to extract (module name)
The module specified by the -x option is not included in the library file.
Check the registered module names using the -m option.
.
W1412U
Uncompatible cpu type module (file name)
The file displayed here is an incompatible module.
The target CPU for input modules must be the same or a compatible CPU.
This message is output in the following case.
• The module for FR is input when the load module for FR80 or FR81 is made.
Please confirm that incompatible instructions are not used about the file to which warning is output.
For detail, please see Section "9.9 Mixing of Objects for a Librarian".
E4402U
Duplicated module name (file name module name)
An attempt was made to register a module with the same name as that which has already been registered.
Duplicated names are not allowed in one library and so the module indicated here is not registered. Use the
-r option for replacement.
E4403U
Duplicated external definition symbol name
(file name symbol name)
The registered modules contain external definition symbols and the symbol indicated here has already been
registered in the library.
Duplicated external definition symbols are not allowed in one library, the module which contains the
symbol indicated here is not registered.
334