Linkage Kit Manual V6-00 - Fujitsu

17.3 Details on Options of the Binary Converter
17.3.4 Specifying to Create a Map List File (-m)
Use this option to output the information at the time of conversion into a map list file.
■ Specifying to Create a Map List File (-m)
[Format]
-m < Map list file name >
[Parameter]
Output map list file name
[Descriptions]
Use this option to output information at the time of conversion into a map list file.
The information at the time of conversion is output into a map list file. The following information is
output. Item (4) is output only if the -sp option is specified.
1. Input file name information
2. Output file name information
3. Output range information
4. Split unit information
5. Padding data value information
If the has no extension, the default extension ".mp3" is added.
[Example 1]
m2bs sfmtfile.mhx -ran 0x10000,0x1FFFF(Example of not specifying the -m option)
A map list file is not created because the -m option is not specified.
[Example 2]
m2bs sfmtfile.mhx -ran 0x10000,0x1FFFF -m logfile
The information at the time of conversion is output into logfile.mp3.
Figure 17.3-1 Example 1 of Contents of logfile.mp3
Input file
Output file
Convert range
Padding data
:sfmtfile.mhx
:sfmtfile.bin
:0x00010000 - 0x0001FFFF
:0xFF
[Example 3]
m2bs sfmtfile.mhx -ran 0x10000,0x1FFFF -m logfile -sp 2,2
The information at the time of conversion is output into logfile.mp3.
Figure 17.3-2 Example 2 of Contents of logfile.mp3
Input file :sfmtfile.mhx
Output file :sfmtfile.b01
:sfmtfile.b02
Convert range :0x00010000 - 0x0001FFFF
Split byte :2
Padding data :0xFF
PART IV OBJECT FORMAT CONVERTERS 299