Linkage Kit Manual V6-00 - Fujitsu

CHAPTER 6 LINKER OPTIONS
6.2.37 Function that Sets Automatically Internal ROM/RAM Areas
(-set_rora)
Refers to CPU information file to set the information regarding the internal ROM/RAM
areas of the targeted CPU.
■ Function that Sets Automatically Internal ROM/RAM Areas (-set_rora)
[Format]
-set_rora
[Parameter]
None
[Descriptions]
Refers to CPU information file to set the information regarding the internal ROM/RAM areas of the
targeted CPU.
The linker, when this option is specified, refers to CPU information file and automatically sets the
internal ROM/RAM areas of the appropriate chip.
The linker sets the following names for the ROM/RAM areas.
• ROM Areas:_ROM_*_
Numbers are entered at the asterisk (*) in order from the lower address region starting from 1. If
there is only 1 area, the number will be ’_ROM_1_’.
• RAM Areas:_RAM_*_
Numbers are entered at the asterisk (*) in order from the lower address region starting from 1. If
there is only 1 area, the number will be ’_RAM_1_’.
These names are used by the -sc options.
[Example]
flnk911s *.obj -o ap.abs -cpu MB91110 -set_rora
140 PART II LINKER