Linkage Kit Manual V6-00 - Fujitsu

CHAPTER 1 SPECIFICATIONS OF LINKAGE KIT
1.10.3 FETOOL (Installation Directory)
FETOOL specifies the root directory in which linkage kit is installed.
The following section gives the description format, an explanation and an example of
FETOOL.
■ FETOOL (Installation Directory)
[Description format]
SET FETOOL = < Path name >
Specify the including drive name.
[Description]
Specify the directory in which linkage kit is installed.
The linkage kit can determine the directory in which message file and library file are installed using the
specified directory as the start point. It accesses the files that are necessary for execution.
When it is not specified, the directory in which the executed load module is located becomes the root
directory.
This environment variable FETOOL can also be used in other development tools. (Such as C/C++
compiler and assembler)
[Example]
SET FETOOL=C:\Softune6
[Recommended directory structure]
Figure 1.10-1 Recommended Directory Structure
\Softune6
\Softune6
\BIN Stores load module of linkage kit
\BIN Stores load module of linkage kit
\LIB Stores message files that does not depend on target CPU
\LIB Stores message files that does not depend on target CPU
\911 Stores library file for FR and message file
\911 Stores library file for FR and message file
[Supplement]
Linkage kit is created on the premises that the respective files are stored in the directory structure as
shown above.
The environment variable FETOOL allows linkage kit to notify the directory path of "SOFTUNE".
16 PART I LINKAGE KIT