Linkage Kit Manual V6-00 - Fujitsu

3.2 Details of Common Options
3.2 Details of Common Options
The following section describes the common options that can be used in the linkage kit.
■ -Xdof Option
■ -f Option
■ -help Option
■ -V Option
■ -XV Option
■ -cmsg Option
■ -Xcmsg Option
■ -cwno Option
■ -Xcwno Option
The -Xdof option cancels reading of the default option file. Refer to Section "3.2.1 Specifying
Suppression to Read Default Option File (-Xdof)" for more details.
The -f option starts reading option from the file in which option is described. Refer to Section "3.2.2
Specifying Option File Name (-f)" for more details.
The -help option displays the help message. Refer to Section "3.2.3 Specifying Display of Help Message
(-help)" for more details.
The -V option outputs a message at program startup. This message is not displayed when the default
processing is executed. Refer to Section "3.2.4 Specifying Version Number and Startup Message of
Program (-V)" for more details.
The -XV option suppresses output of message during startup. Refer to Section "3.2.5 Suppression to
Output Version Number and Startup Message of Program (-XV)" for more details.
The -cmsg option displays the end message of the program. Refer to Section "3.2.6 Specifying Display of
End Message (-cmsg)" for more details.
The -Xcmsg option suppresses display of the end message for the program. Refer to Section "3.2.7
Suppression to Output End Message (-Xcmsg)" for more details.
When a warning is issued in this program, 1 is returned to OS as the end code. Refer to Section "3.2.8
Specifying to Set the End Code to 1 When Warning is Issued (-cwno)" for more details.
When a warning is issued in this program, 0 is returned to OS as the end code. Refer to Section "3.2.9
Specifying to Set the End Code to 0 When Warning is Issued (-Xcwno)" for more details.
PART I LINKAGE KIT 29