Linkage Kit Manual V6-00 - Fujitsu

CHAPTER 6 LINKER OPTIONS
6.2.16 Specification of the Number of Digits in the List Line
(-pw)
By default, up to 80 digits can be displayed in one line of the map list and object
content list output by the linker. This option is specified to change the number of digits
to be displayed in one line.
■ Specification of the Number of Digits in the List Line (-pw)
[Format]
-pw < Number of digits > (Default : 80)
[Parameter]
Number of digits to be displayed in one line. Specify the number in the range of 80 to 1023.
[Description]
The length of one line of the link list file and object content list is specified.
If this value is not specified, 80 is set.
If the values 70 to 79 are specified, the linker sets the number of digits to 80 after outputting I0311L.
[Example]
flnk911s a1 a2 a3 -o a123.abs -m a123.map -dt -pw 100
The number of digits to be displayed in one list line is set to 100.
Notes:
The following lists can specify the number of digits of one line by -pw option.
• Link Map List(.mp1)
• Section Detail Map List(.mpm)
The following lists can not specify the number of digits of one line by -pw option.
• Absolute Format Assemble List(.als)
• External Symbol Cross-reference Information List(.mpx)
• Local Symbol Information List(.mps)
112 PART II LINKER