SYCON.net PROFIBUS DP Slave DTM

Appendix 125/132
13 Appendix
13.1 Identifier Bytes
In the configuration telegram identifier bytes are used. The meaning of
them is specified in the PROFIBUS specification.
The following table is an overview.
Value
Meaning
GIF/SIF 0x00 00 free place
0x01-0x0F 01-15 see SIF
GIF 0x10-0x1F 16-31 1-16 Byte Input Consistency over Byte
GIF 0x20-0x2F 32-47 1-16 Byte Output Consistency over Byte
GIF 0x30-0x3F 48-63 1-16 Byte Input/Output Consistency over Byte
0x40-0x4F 64-79 see SIF
GIF 0x50-0x5F 80-95 1-16 Word Input Consistency over Word
GIF 0x60-0x6F 96-111 1-16 Word Output Consistency over Word
GIF 0x70-0x7F 112-127 1-16 Word Consistency over Word
0x80-0x8F 128-143 see SIF
GIF 0x90-0x9F 144-159 1-16 Byte Input Consistency over whole length
GIF 0xA0-0xAF 160-175 1-16 Byte Output Consistency over whole length
GIF 0xB0-0xBF 176-191 1-16 Byte Consistency over whole length
0xC0-0xCF 192-207 see SIF
GIF 0xD0-0xDF 208-223 1-16 Word Input Consistency over whole length
GIF 0xE0-0xEF 224-239 1-16 Word Output Consistency over whole length
GIF 0xF0-0xFF 240-255 1-16 Word Consistency over whole length
Table 58: Identifier bytes (overview)
13.1.1 Identifier Bytes (General Identifier Format GIF)
For the identifier bytes in general identifier format the following table shows
the meaning.
Table 59: Identifier Bytes (General Identifier Byte Format GIF)
DTM for Hilscher PROFIBUS DP Slave Device | Configuration of Hilscher Slave Devices
DOC091001OI07EN | Revision 7 | English | 2011-09 | Released | Public © Hilscher, 2009-2011