SYCON.net PROFIBUS DP Slave DTM
SYCON.net PROFIBUS DP Slave DTM
SYCON.net PROFIBUS DP Slave DTM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tools 95/132<br />
4. Evaluate received packet.<br />
Receive > Packet header<br />
Under Dest the receiver is displayed.<br />
Under State the status code or possibly an error code is displayed.<br />
All status and error codes are either to be found in this handbook via the<br />
section Overview Error Codes auf Seite 102, in the Dual Port Memory<br />
Manual or in the DeviceNet <strong>Slave</strong> Protocol API Manual.<br />
Under Cmd the response identification read request is displayed.<br />
Figure 65: Example - Reading data via „Get <strong>DP</strong>M IO Info“ – Receive > Packet header<br />
Sample Data<br />
Receiver 0x20 (Destination Que Handle)<br />
State 00000000 indicates that the read request could be<br />
executed without error.<br />
If during the execution of the read request an<br />
error was detected, an error code is<br />
displayed.<br />
Response<br />
Identification Read<br />
Request<br />
00002F0D<br />
GET <strong>DP</strong>M IO INFO CONFIRMAITON<br />
(Confirmation)<br />
<strong>DTM</strong> for Hilscher <strong>PROFIBUS</strong> <strong>DP</strong> <strong>Slave</strong> Device | Configuration of Hilscher <strong>Slave</strong> Devices<br />
DOC091001OI07EN | Revision 7 | English | 2011-09 | Released | Public © Hilscher, 2009-2011
Change language