SYCON.net PROFIBUS DP Slave DTM
SYCON.net PROFIBUS DP Slave DTM
SYCON.net PROFIBUS DP Slave DTM
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuration 60/132<br />
Setting<br />
Diagnosis update delay<br />
Description<br />
Some <strong>Slave</strong> devices which are newer require more time for the consistency testing for<br />
the processing of the SET_PRM parameter zing telegrams.<br />
In this case the standard diagnosis cycle is not sufficient after the parameterizing phase,<br />
to detect the disposition of the <strong>Slave</strong> for the DATA_EXCHANGE.<br />
With the diagnosis delay, the number of diagnosis cycles is advanced after the<br />
parameterizing phase, which is the maximum that the Master waits for this disposition,<br />
before it starts a new parameterizing.<br />
The value range is 0..255.<br />
Table 19: Configuration > Extensions<br />
<strong>DTM</strong> for Hilscher <strong>PROFIBUS</strong> <strong>DP</strong> <strong>Slave</strong> Device | Configuration of Hilscher <strong>Slave</strong> Devices<br />
DOC091001OI07EN | Revision 7 | English | 2011-09 | Released | Public © Hilscher, 2009-2011