SYCON.net PROFIBUS DP Slave DTM

Configuration 55/132
4.3.2 Select Available Modules
There are several possibilities to select an available module and insert it in
the list Configured Modules:
Possibility
Double Click on
available Module
'Insert' Button
'Append' Button
Table 17: Select Available Modules
Procedure
Select a module by clicking on it in the list Available Modules
and with a double click on this module it appears as last module
in the list Configured Modules.
Select a module by clicking on it in the list Available Modules.
With a mouse click on the Insert button, this module appears in
the list Configured Modules in the actually selected slot.
Select a module by clicking on it in the list Available Modules.
With a mouse click on the Append button, the selected module
is appended as last module in the list Configured Modules.
Note: A multiselection is possible. That means several modules can be
selected in the list Available Modules by holding the SHIFT key and
inserted in the list Configured Modules.
4.3.3 Delete Configured Modules
To delete a configured module from the list Configured Modules, there is
the following possibility:
Button
'Delete'
Table 18: Delete Configured Modules
Procedure
Select a module by clicking on it in the list Configured
Modules. With a mouse click on Delete the selected module
will be deleted from the list Configured Modules.
DTM for Hilscher PROFIBUS DP Slave Device | Configuration of Hilscher Slave Devices
DOC091001OI07EN | Revision 7 | English | 2011-09 | Released | Public © Hilscher, 2009-2011