SYCON.net PROFIBUS DP Slave DTM
SYCON.net PROFIBUS DP Slave DTM
SYCON.net PROFIBUS DP Slave DTM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuration 53/132<br />
4.3 Modules<br />
Important: For the option Device-Settings > Configuration Data Flag ><br />
Configuration from Master and if in the <strong>net</strong>work project the <strong>PROFIBUS</strong><br />
<strong>DP</strong> <strong>Slave</strong> <strong>DTM</strong> is dropped to the root busline (Stand-Alone <strong>Slave</strong>), the<br />
<strong>Slave</strong> device uses the configuration, which the Master device sends via<br />
<strong>PROFIBUS</strong> to the <strong>Slave</strong> device and the configuration step: „Configure<br />
<strong>Slave</strong> Modules“ can be used for the default configuration or is to be<br />
omitted.<br />
At the pane Modules modules can be selected or assigned and configured.<br />
Figure 27: Configuration > Modules<br />
There are two kinds of <strong>Slave</strong>s. A simple <strong>Slave</strong> has a fixed data length. The<br />
data length of a modular <strong>Slave</strong> is configurable. The selection list Available<br />
Modules shows all possible modules of the <strong>Slave</strong>.<br />
• Module Configuration of a simple <strong>Slave</strong><br />
In the case of a simple <strong>Slave</strong>, one module is shown and it is copied<br />
automatically into the list Configured Modules.<br />
• Module Configuration of a modular <strong>Slave</strong><br />
In case of a modular <strong>Slave</strong>, the user has to select the required modules<br />
manually.<br />
<strong>DTM</strong> for Hilscher <strong>PROFIBUS</strong> <strong>DP</strong> <strong>Slave</strong> Device | Configuration of Hilscher <strong>Slave</strong> Devices<br />
DOC091001OI07EN | Revision 7 | English | 2011-09 | Released | Public © Hilscher, 2009-2011